ZKTeco Inbio 260 Two Door Controller  readers transmit fingerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a data-base. InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modification of network parameters directly and easily.

Zk Inbio 260 carries out the matching of fingerprints on the panel, itself. The FR Series of readers transmit fingerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a data-base. InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modification of network parameters directly and easily.

InBio controller firmware can be upgraded in the field. InBio panels stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events/transactions. InBio is backed up in real-time to an on-board SD card. Data is preserved if power is lost. InBio continues to operate if network connection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxiliary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers

• Number of Door Controller: 2 Door
• CPU – 32bit MIPS CPU
• RAM – 32MB, Flash Memory- 128MB
• Fingerprint Capacity – 3000
• Card Capacity – 30,000
• Event buffer – 1,00,000
• Numbers of readers supported – 8(4 RS-485 Reader, 4 26-bit wiegand reader)
• Number of inputs – 6(2 Exit Button, 2 Door Status, 2 AUX)
• Number of Outputs – 4 (2-Form C Relay for Lock and 2-Form C Relay for Aux Output)
• Power / Current – 12V +5A for Controller, Rated Max 1A
• Wiegand Reader Port – 4ea (26/34 bit Wiegand, 4/8bit for PIN RS485)
• Reader Port – 1no. extended RS485 Port
• Communication – RS485, TCP/IP
• Baud Rate – 38,400bps (recommended) / 9600bps, 19,200 bps, 57,600 bps (selectable)
• Supports – F12 (RS 485) Fingerprint Reader
• Dimensions – Length: 10” (226 mm)
• Width: 6.6” (106 mm)
• Weight: 3.6Kg