Sale!

APC Smart-UPS SRT 5000VA 5kva 230V SRT5KXLI

Original price was: KSh600,000.00.Current price is: KSh550,000.00.

APC Smart-UPS SRT 5000VA 5kva 230V SRT5KXLI

Technical Specifications

Output power capacity: 4.5 KWatts / 5.0 kVA

Max Confidurable Power: 4.5 KWatts / 5.0 kVA

Nominal Output Voltage: 230V

Output Voltage Distortion: Less than 2%

Output Frequency (sync to mains): 50/60Hz +/- 3 Hz

Other Output Voltages: 220, 240

Load Crest Factor: 3 : 1

Topology: Double Conversion Online

Waveform Type: Sine Wave

Output Connections: (6) IEC 320 C13 (Battery Backup), (2) IEC Jumpers (Battery Backup), (4) IEC 320 C19 (Battery Backup)

Bypass: Internal Bypass (Automatic and Manual)

Nominal Input Voltage: 230V

Input Frequency: 40 – 70 Hz (auto sensing)

Input Connections: Hard Wire 3 wire (1PH+N+G)

Input Voltage range for main operations: 160 – 275V

Input voltage adjustable range for mains operation: 100 – 275 (half load)V

Other Input Voltages: 220, 240

Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Included Battery Modules: 2

Typical recharge time: 1.5hour(s)

Nominal Battery Voltage: 192V

Expected Battery Life (years): 3 – 5

Interface Port(s): RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB

Audible Alarm: Audible and visible alarms prioritized by severity

Emergency Power Off (EPO): Yes

Available SmartSlot™ Interface Quantity: 1

Surge energy rating: 480Joules

Warranty: 1 Year

Category: Apc Tag: APC Smart-UPS SRT 5000VA 5kva 230V SRT5KXLI at city shop kenya at discounted affordable price for quality products

Description
Reviews (0)

APC Smart-UPS SRT 5000VA 5kva 230V SRT5KXLI

Buy APC Smart-UPS SRT 5000VA 5kva 230V SRT5KXLI from city communication Kenya at discounted prices

SRT5KXLI Features

APC Smart-UPS SRT 5000VA 230V

10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.

Smart-UPS On-Line Features & Benefits

Serviceability

Audible alarms
Provides notification of changing utility power and UPS power conditions
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adaptability

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

Manageability

LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
SmartSlot
Customize UPS capabilities with management cards.

Protection

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Availability

Scalable runtime
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Marketing Features

Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Save time with easy and convenient remote/network accessibility.
Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Print Technical Specification

Output

Output power capacity
4.5 KWatts / 5.0 kVA
Max Configurable Power (Watts)
4.5 KWatts / 5.0 kVA
Nominal Output Voltage
230V
Output Voltage Distortion
Less than 2%
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
Other Output Voltages
220, 240
Load Crest Factor
3 : 1
Topology
Double Conversion Online
Waveform type
Sine wave
Output Connections
(6) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (Battery Backup)
(4) IEC 320 C19 (Battery Backup)
Bypass
Internal Bypass (Automatic and Manual)

Input

Nominal Input Voltage
230V
Input frequency
40 – 70 Hz (auto sensing)
Input Connections
Hard Wire 3 wire (1PH+N+G)
Input voltage range for main operations
160 – 275V
Input voltage adjustable range for mains operation
100 – 275 (half load)V
Other Input Voltages
220, 240

Batteries & Runtime

Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules
2
Typical recharge time
1.5hour(s)
Nominal Battery Voltage
192V